Product Description
Skunk 2 Cold Air Intake 343-05-0200, 2012-2013 Honda Civic Si Skunk2 has released a cold air intake system for the 2012-2013 Honda Civic Si Coupe and Sedan. This intake showed an increase of 6WHP and 8lbs-ft of torque during testing at Skunk2. Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connectors for use with Skunk2 or similar brand throttle bodies are sold separately). In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance. No cutting or modifying of the fender well liners is needed to install this intake and the battery can retain it's factory mounting position. Fitment: 2012 - 2013 Honda Civic Coupe (Si) 2012 - 2013 Honda Civic Sedan (Si) Skunk2 2012-2013 Honda Civic Si Cold Air Intake: Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the 06-11 Civic Si. The results are the best performing, best fitting intake system available. Skunk2s Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connectors for use with Skunk2 throttle bodies or similar sold separately). The two piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that dont utilize MAF sensors. In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2s design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors designs that locate the air filter from the side. That, combined with a design that doesnt require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Part Number: 343-05-0200 Notes: Cold Air Intake Manufacturer: Skunk2 Product Category: Intake Systems Skunk2 12-13 Honda Civic Si Composite Cold Air Intake
